How To Install a Tregaskiss I.C.E.™ Neck Assembly on Tregaskiss® G1 Series Robotic Guns

Tregaskiss I.C.E. components will come assembled on your MIG gun. You will need to remove the Tregaskiss I.C.E. neck assembly to install it on the robot.
 

---

Step 1:

• Remove front-end consumables.
• Disconnect both water lines at the Quick Connect coupler.

---

Step 2:

• Loosen neck bolt.
• Remove Tregaskiss I.C.E. neck assembly

---

Step 3:

• Insert the connector housing of the new torch into the mounting arm.
• NOTE: If existing clamping device on the arm has 2 bolts, remove only the front bolt and snug the rear bolt. 

---

Step 4:

• Reinstall Tregaskiss I.C.E. neck assembly.
• Tighten the neck bolt to torque specification on the torch (60 in.-lbs. or 7Nm).

---

Step 5:

• Reinstall front-end consumables.
• Connect water lines with the Quick Connect coupler.
• Fasten water line bracket with bolt (bracket and bolt included in the Tregaskiss I.C.E. package).

INS045 REV 02/05