Quick-Connect Blocks and Adaptors

For those who have feeder models not found in our power pins list, or for those welders who use their MIG Gun on various feeder models, quick-connect blocks and adaptors are available.

Quick-connect blocks form an adaptive bridge from your existing gun feeder connection to a different kind of feeder connection.

Quick-Connect Blocks
Quick-Disconnect Block Kits

Part Numbers

417	Tweco® #4 style power pin (part # 214) to quick connect block to adaptor / power pin to feeder
417-50	Euro connection (part # 425) to quick connect block to adaptor / power pin to feeder
417-60	Tweco #5 style power pin (part # 214-12) to quick connect block to adaptor / power pin to feeder
417-63	Miller® style power pin (part # 214-6-xx or 214-1) to quick connect block to adaptor / power pin to feeder
417-64	Miller style power pin (part # 214-6-xx or 214-1) to quick connect block to Euro feeder
417-65	Tweco #4 style power pin (part # 214) to quick connect block to Euro feeder

Part Numbers

1199

Quick-disconnect block kit; includes power pin part # 2200008

Adaptors
E-Z Feed Adaptors

Part Numbers

For Airco® Feeders

418-1

for models: AHF-E1, AHF-G, AHF-L, AHF-N, AHF-R, AHF-S, AHF-T, AHF-U, AHF-V, Mobilmatic, Little Dipper Dipstick-160, DIP-PAC-200, DIP-COR-300

For Auto Arc® Feeders

418-1

for models: MUREX 50

For Bancroft® Feeders

418-4	for models: 700
418-6	for models: 750, 775
418-29	for models: 750, 755

For Dayton® Feeders

418-14

for all models

For ESAB® Feeders

418-9

for models: WFU 30, WFU 50

For Ford® Feeders

418-4

for models: Rotunda®

For Gabriel® Feeders

418-6

for models: Gabriel

For Gilliland® Feeders

418-21

for models: Gilliland, San Diego

For Hobart® Feeders

418-4

for models: 27, 27 A, Dualmatic 27/70, H3S, H4S, H6S, 44, 45, 70, 70S, SP100, BETA-MIG 250 (Old Style), MEGA-CONDS

For Hobart; Tweco® #4 Setups

418-28

for models: BETA-MIG (New Style) BETA-MIG250 and 251, Dual Feeder, Digital 2000, Dual Digital, Porta Feed 17, Ultra Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC

For Hobart; Tweco #5 Setups

418-29

for models: BETA-MIG (New Style) BETA-MIG250 and 251, Dual Feeder, Digital 2000, Dual Digital, Porta Feed 17, Ultra Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC

For Kobelco® Feeders

418-33	for most models and CV feeders
418-35	for most models

For Lee® Feeders

418-14

for all models

For Lincoln® Feeders

418-5	for models: MN-1, LN4, LN5, LN6
418-6	for models: LN7, LN9, LN22, LN25
418-37	for models: NA2, NA3, NA4, NA5

For Linde® / L-Tec® Feeders

418-5	for models: EH-8, MIG-32, 160, V160, 3 IN 1, L-Tec 225, SWM-20, SWM-22, SWM-31, SWM-32, SWM-34, SWM-37
418-7	for models: MM-253, SWM-11A, SWM-14, AWM-20, SWM-34, SWM-37, AGA 200, SWM-31, SWM-39, EH8, V160, MIG31, MIG32, 3 IN1, MM206
418-8	for models: DigiMIG & DigiMIG Dual EH1, EH5, EH10, EH11, SHE-4, SHE-5, SWM11, SWM11B, SWM12, SWM13, SWM23, SWM24, SWM25, SWM26, SWM35, VAM2, L-Tec 35, MIG 35, DigiPulse, SHE 4 & 5

For Matco® Feeders

418-14

for all models

For Mid-States® Feeders

418-1	for models: ARC 160
418-9	for models: W33

For Miller® Feeders

418-1	for models: MHFC-H, MHFC-R1
418-4	for models: MW1, MW100
418-9	for models: 10A, 10E, 30A, 30B, 70A, 80A, Spoolmatic 150, Millermatic 35 (Old Style)
418-10	for models: Cricket Intellimatic Sidekick, D-51A, Millermatic 90, 120, 130, 150, 200, 250, MM-35 (New), New Automatic 1, PortoMIG, S-42GL, S52A, S-54A, Swing Arc-Dual, Swing Arc-Single, S-32S, S64M, 52D, 54D, 52E, 54E, ALL 22 and 60 Series Feeders

For NAPA® Feeders

418-14

for all models

For OTC Daihen® Feeders

418-14	for models: CM231
418-39	for models: CM741, CMRE-741, AF4001, D Series

For OXO™ Feeders

418-4	for models: 760
418-9	for models: P120

For Panasonic® Feeders

418-27

for models: Panasonic

For P&H / Chemtron® Feeders

418-14

for models: RF1, RF5 (OLD)

For Powcon® Feeders

418-9

for models: Power Drive 1, Power Drive 1 E, 200 SMF

For Powermate® Feeders

418-14

for models: 90, 160, 225

For Rankin® Feeders

418-9

for all models

For Seelye® Feeders

418-14

for all models

For Snap-On® Feeders

418-14

for models: Portable MIG, YA205

Part Numbers

For Airco® Feeders

4988	for models: AHF-N, AHF-R, AHF-S, AHF-T, AHF-U, AHF-V, AHF-J, AHF-L, AHF-W (incl. pre-cut guide tubes)
4820K	for models: Dippak 250, 300, MIGhty 2E, 4HD, IIE, IVHD, CEMIG 169T, 200T

For Bernard® Quick-Disconnects

4920

fits all existing Bernard adaptors

For Century® Feeders

4820K

for models: 100, 130, 150, 160, 200, 225, 250, Powermate 225

For ESAB® Feeders

4970	for most models (incl. pre-cut guide tubes)
4820K	for models: Me-2, MIGmaster 180

For European Feeders

4970A

for most European models

For Gelco® Feeders

4820P

for all models

For Hobart® Feeders

4982	for models: all models except Beta-MIG 200-2000
4820G	for models: Beta-MIG 200-2000 Models 17 and 19

For Lincoln® Feeders

4981	for models: LN-4, LN-5, LN-6, LN-8, LN-9 (including pre-cut guide tubes and plugs)
4986	for models: LN-7, SP-200, LN-22 (including pre-cut guide tubes and plugs)

For Linde® Feeders

4984	for models: SWM-11, 11B, 23, 24, 25, 26, 35, SHE-3, SHE-5, SHE-10, DigiMIG (including pre-cut guide tubes)
4984A	for models: DigiMIG
4984B	for various models

For L-Tec® Feeders

4820L

for models: MIG-31, SWM-30, SWM-31

For Machinery & Weldor Feeders

4983

for models: MHFC-H, MHFC-R1 (including pre-cut guide tubes)

For Miller® Feeders

4983	for models: 10, 30, 70, 80 series (including pre-cut guide tubes)
4995	for models: 542 GL, Swing Arc, Porta-MIG, Millermatic 40, 50, MIGmate, Millermatic 130, S-42S, S32-P (including pre-cut guide tubes and plugs)
4820G	for models: MIGman 105 (including pre-cut guide tubes)

For National® Feeders

4820N

for most models

For OTC Daihen® Feeders

4820P

for most models

For Panasonic® Feeders

4820N

for models: YW501FK

For Powcon® Feeders

4820K

for models: PDP1, powerdrive 1, powerdrive 1E, DAV MIG